Accessories Installation Aids Tools

• Internet Line Test
• OSD menu is used easily
• Auto-identify NTSC, PAL
• Low power consumption / once charged, the power can be used for 4-5 hours
• Support RS232 and RS485 syncchronically
• Auto-reduce power consumption
• 2.5" inch LCD
• Exterior power: DC9V(2A)
• Interior Voltage: DC/3.6V 1200mah Lithium Battery

• 3.5" Color TFT LCD
• 480 (W) x 234 (H)
• CCFL back light
• 10,000 hour min lamp life-time at 25C temp
• 150:1 typical contrast ratio

• 4 Video Port Analog to Digital Converter
• USB Connector

• Digital (VGA) to Analog (TV RCA)
• Conv:1280 x 1024
• w/ rem
• control (display PC on TV)

• Analog to Digital USB converter
• FREEZE function (1 RCA input, 1 Freeze Input)

• High Resolution AD02A - Converts Video to DVD

• Analog (RCA) to Digital USB 2.0 Video Adapter

• 8 Port Passive UTP Tx/Rx Module
• No power required for up to 1000 feet
• SCW-8337 8 Port

• Includes a VB-3 Transmitter
• Includes a VB-3 Receiver
• 1 Vp-p 75Ohms (BNC Connector)

• Video import: 1Vp-p/75 ohms, 8-channel
• Video export: 1Vp-p/75 ohms, 1-channel
• Image degree of separation: > or =40dB
• Signal bandwidth: 2MHz, +/-3dB
• Switching time: 1 sec-45 secs
• Channel switch: side road/automatic

• Single channel 2400 metre Twisted Pair TX/RX Kit with Terminals

• Analog (RCA) to Digital USB Video Adapter

• 4 In 4 Out Video Amplifier

• Li-Ion Rechargeable Battery Pack

• Digital Channel Modulator for Ch. 14-69

• Video Extender 4 Video In/ 4 Video out

• RS232 to RS485 Converter for Speed Dome

• Video Only Adapter 4x BNC Male to 4x RJ-45 Transmission 600m

• Single channel 2400 metre Twisted Pair RX

• 1 in 1 out A/V Amplifier

• Single channel 2400 metre Twisted Pair TX

• 4 x BNC to 1 x RJ45

• Helps to prevent video-signal distortion caused by video ground loops
• Helps to eliminate picture tearing, cross talk and rolling
• Built in surge suppression
• BNC male to BNC female
• Passive, no power required

• 1 x BNC+ Audio to 1 x RJ-45 (Twisted Pair TX/RX 600m)

• Professional Coax RG-6 & RG-59 Crimper

• Video Distribution
• 1 input channel
• 2 output channels
• Video input levels 0.8~1.2V pp 75 Ohm
• Video output level 1V pp
• Dimensions: 49 x 42 x 50mm
• Power: 12VDC 100ma
• Transmission range up to 300M
• Connectors BNC
• Compatible with NTSC or PAL

• DB9, RS232 female connector to 2 wire terminal block for RS485
• Two wire, differential signals, half duplex
• Passive, no power required
• Power consumption, 10ma max
• Auto switching baud rate
• Speeds up to 115,200 baud over a distance of 1200 meters
• Up to 32 units connected together in RS-485 multidrop operation.

• BNC male to BNC female

• Red Sign NOTICE Camera on Duty Sign 18" x 24" (Aluminum)
• Limited Supply

• Bag of 100 qty Coax Clips
• These cable clips for tacking up Coax and other cable good for wood and even Concrete sold by bags of 100

• Coax wire stripper

• Red Sign NOTICE Camera on Duty Sign 12" x 9"  (Aluminum)

• Red Sign NOTICE Camera on Duty Sign 18" x 24" (Plastic)

• Red Sign NOTICE Camera on Duty Sign 12" x 9" (Plastic)

RJ45 Network Coupler. Ethernet RJ45 Female to Female straight through. Connects two network patch cords together.

• Digital (VGA) to Analog (TV RCA)
• Conv:1280 x 1024
• w/ rem
• control (display PC on TV)

• BNC+2RCA Connector for RJ-45 Jack + Power

• Quickly and reliably tests coax cable terminated with BNC Connectors
• Test coax cabling for opens and shorts
• Two modes of operation 50/75 Ohm and 500 Ohm terminators
• Two modes of operation: standard and Hi-Z for Long runs
• Test Coax for opens and shorts
• Six-volt battery installed in tester
• Easy to operate

• Features the patented EZ-RJ45 Crimp Tool for crimping RJ-11, RJ-12, RJ-45 and EZ-RJ45 connectors.
• Kits include the EZ-RJ45 Cat 5 connector.

• Crimps and trims extended wire in EZ-RJ45 Connector in a single cycle.
• For use with EZ-RJ45 Cat 5/5e & Cat 6 Connectors.
• Will also work on most other RJ-11, RJ-12 and RJ-45 connectors. (Except AMP)
• Patented

• Thru holes allow wire pairs to be inserted thru front of connector.
• Works with solid or stranded wire.
• Simple one piece design...no bars or liners.
• FCC compliant, UL rated.
• Use in category 3, 5, 5E compliant data networks.
• EZ to verify wire sequence.
• Faster terminations.

• For use in Cat 6 compliant data networks.
• Category 6 performance per EIA/TIA B.2.
• EZ to verify wire sequence.
• Works with solid or stranded wire.
• Faster terminations with reduced scrap.
• FCC compliant, UL rated.
• Simple one piece design, no bars or liners.

• Prolong patch cord life
• Maintain bend radiuses required for standards compliance
• Terminations have a professional finished look
• No more snags or hang ups, causing tangled messes
• Easier to unlock the connector when unplugging from jack/port

• Thru holes allow wire pairs to be inserted thru front of connector.
• Works with solid or stranded wire.
• Simple one piece design...no bars or liners.
• FCC compliant, UL rated.
• Use in category 3, 5, 5E compliant data networks.
• EZ to verify wire sequence.
• Faster terminations.

UTP Stripper Tool

Replacement Trimming Blade For EZ-RJ45 Cavity, 2 Pack

• 6.5" Stainless Steel Scissors